| After-sales Service: | Available |
|---|---|
| Warranty: | Based on Negotiation |
| Processing Material: | Special Agricultural Products, Agronomic Products |
| Application: | Dairy |
| Customized: | Customized |
| Certification: | CE, ISO9001 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier High Quatility Tryptophan Production Line
Application
1.Tryptophan is one of the eight necessary amino acids for human and animal life.
2. According to the utility there are three kinds, such as feed,food and medicine.
Our production line
1. Advanced and reliable fermentation and extraction processing technology.
2. Energy-saving, water-saving, labor-saving and little pollution. the ammonia liquor and mother liquor will be recycled .
3.Mostly machinery with fully stainless steel to be sure these is no corrosion.
4. Advanced surface treatment craft. Oil and dirty resisting.
The best solution project and highest possible quality machines will be offered according to your Demands. Maximum your cost performance.
Tryptophan product specification
| No. | Item | Unit | Index |
| 1 | Content(according to C11H12N2O2) (dry content) | % | ≥98 |
| 2 | Specific spin luminosity | [α] 20D | -29.0°~ -32.8° |
| 3 | Dry weightlessness | % | ≤0.5 |
| 4 | Crude ash | % | ≤0.5 |
| 5 | PH(1% Aqueous solution) | 5.0-7.0 | |
| 6 | Arsenic | mg/kg | ≤2 |
| 7 | Heavy metal (Pb) | mg/kg | ≤5 |
| 8 | Heavy metal (Cd) | mg/kg | ≤2 |
| 9 | Heavy metal (Hg) | mg/kg | ≤0.1 |
| 10 | Salmonella(In 25g sample) | undetectable |
Tryptophan fermentation and extraction process diagram
Technical Process Description
Fermentation needs syrup from glucose line as main carbon source as well as adding nitrogen source and qualified strain. The reaction will be supported by sterile air through continuous sterilization , via cooling water in coils, controlling certain temperature and air volume.
During production process, in order to maintain the stability of strain performance, it is necessary to separate and purify the production strains regularly, to eliminate the declining strains and select high yield and good strains for production.
By using the metabolic function of strain, the Tryptophan can be accumulated to the maximum extent by means of metabolic control. Through continuous sterilization, air purification, strain culturing, fermentation culturing process, complete the accumulation process of Tryptophan, to achieve high yield of acid, high conversion rate, low residual sugar, low cycle, low energy consumption.
1.2 Extraction
1.2.1 Fermentation solution pretreatment
Tryptophan fermentation is neutral fermentation. In order to prevent the fermentation liquid from being contaminated by bacteria during storage to reduce tryptophan, during the material discharge process, the fermentation liquid is inactivated by the heater, while the fermentation liquid is mixed with dilute sulfuric acid through a static mixer, and the pH value is adjusted to the process value, into the fermentation liquid transfer tank, and then into the extraction workshop for purification process.
1.2.2 Ceramic membrane filtration
The essence of the membrane separation process is the process of separating tryptophan fermentation liquor into tryptophan clear liquor and polymer protein and impurities through ceramic membrane, similar to the screening process, according to the size of the membrane pore size to achieve the purpose of material separation. Materials with molecular diameters greater than 0.05um and less than 0.05um are separated by high pressure generated by high pressure pumps. In the process of tryptophan production, membrane filtration method was used to remove mycelium and impurities greater than 0.05um in the fermentation liquor.
1.2.3 Ion exchange
The clear liquor filtered through the membrane enters the filtrate tank, and the separation system is used to continue purification. During the extraction and production of tryptophan, the functional genes in the resin exchange tryptophan ions in the membrane filtrate, the tryptophan is adsorbed on the resin, and the tryptophan ions on the resin are replaced by NH4+ in the ammonia water.
1.2.4 Deamination
The eluent after separation contains part of ammonia residue. After entering the deammonia tower, the ammonia liquor is separated. After the separation, the ammonia water is recycled and the separated deammonia liquor enters the next process.
1.2.5 Evaporator
When the deamination liquor enters the crystallization evaporator, it is evenly distributed in the shell tube of the evaporator through the distributor. Under the action of gravity, the material is film-like and flows from top to bottom. At the same time, heat exchange occurs between the film of the material and the steam on the outer wall of the pipe, and the water in the material is evaporated, which increases the concentration of tryptophan.
1.2.6 Crystallization
After the material is out, the concentrated liquor containing part of the tryptophan crystal enters the vertical crystallization tank. According to the product characteristics, the crystal is cultured by cooling and isoelectric point method. When the crystal meets the process requirements, then it enters the next process.
1.2.7 Crystal separation
Automatic discharge centrifuge and automatic discharge plate filter press are used for separation and extraction. The separated filter cake enters the drying process and the tryptophan mother liquor returns to the separation process for recycling extraction.
1.2.8 Flash drying
The material enters the dryer, under the strong action of the high-speed rotating agitator, the block material is quickly crushed, and it's fully in contact with the hot air, heated and dried. The dry powder rises with the hot gas, the small particles are discharged from the center of the ring outside the dryer, and the undried or large materials are thrown to the wall by centrifugal force, and fall to the bottom again to be crushed and dried. The dried material is carried by air into the dust collection system for collection and treatment.
1.2.9 Product packing
According to different requirement for the different specifications, to adopt automatic packaging system to package.
More info pls feel freely to contact with our team!
Our team
1.Strong and vigorous technological force member.
2.Abundant theory and practical experience.
3.The zealous service and fast reply.
4.The scientific management system.
Our team will offer specialized and kindly service for you from end to end.
Our culture
Keeping Integrity, Profession, Efficiency, and Win-Win as our spirit and making friends through business contacts as our goal, we are always ready to provide satisfactory services for our friends from all over the world.
WE ARE WHERE YOU ARE!
By choosing MecKey you are choosing the perfect long-term partner for your daily operations. Our service network can reach you wherever you are.
About Meckey
Meckey is a shareholding company in corn, wheat, potato, cassava, processing area, secialized in project engineering & construction, equipment manufacturing, technical support & sevices to customers worldwide.
Turnkey solutions
1. Corn grain to corn starch, gluten, germ/corn oil, fiber.
2. Wheat flour to vital gluten, A starch, B starch.
3. Potato(cassava) to potato(cassava) starch, cassava flour.
4. Starch to glucose, DMH, sorbitol, HFCS55.
5. Corn flour(rice) to glucose, DMH, sorbitol, HFCS55.
6. Modified starch, maltodextrin, potato flakes.
7. L-lysine, GSM.
Payment item
As a routine, 30% down payment, 70% by L/C at sight, 10% Bank guarantee supplied by Meckey. Workable details should be as per discussion based on the contract.
Delivery
Both your destination port or China port are available according to terms of contract. All exporting transactions can be on our duty.
Warranty
The warranty period of each item of equipment delivered shall be 12 months from the date of the signing ACCEPTANCE MEMO or 17 months from the date of shipment, whichever is earlier.
You can download brochures if you have such demand.
If you have any doubts, please do not hesitate to contact us.
Welcome to contact us for more details.
Welcome to Contact US!
Beijing Meckey Engineering Co.
Website: cnmeckey.en.made-in-china.com
Add: Bldg.5-1511, No. 10 Ronghua south road, BDA, Beijing
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}